Hardness, nitrates, pH, sanitary compliance: the real tap water quality in Vic-le-Comte (very soft water), with official Hub'Eau data updated monthly.
✓ Compliant with sanitary standardsWith only 3°f, water in Vic-le-Comte (Puy-de-Dôme) is among the softest in France. Scale deposits are nearly nonexistent, reducing regular maintenance needs and extending appliance lifespan. For very soft water, activated charcoal filters tend to be more useful than softeners — they improve taste without altering the mineral content. Official sanitary tests declare it compliant with current standards across all monitored parameters.
Results from the latest official sanitary samples (Hub’Eau, French Ministry of Health). Click a card to understand what each parameter measures.
Sanitary compliance summarises adherence to French regulatory limits across all analysed parameters (bacteriology, chemistry, radioactivity). Compliant water can be consumed directly from the tap without additional treatment.
The TH (titre hydrotimétrique) measures calcium and magnesium concentration, expressed in French degrees (°f). The higher it is, the harder the water and the faster limescale deposits on surfaces and in appliances.
PFAS are persistent chemical compounds, sometimes called "forever chemicals", used in industry. The vigilance threshold used here is 0.1 µg/L, consistent with current health recommendations.
pH measures water acidity. Regulations require a value between 6.5 and 9: outside this range, water may encourage pipe corrosion or affect taste.
Free chlorine is added to disinfect water and prevent bacterial growth in the distribution network. High levels can produce a perceptible taste or odour, without health risk at authorised levels.
Turbidity measures water clarity, in NTU (nephelometric turbidity units). A low value indicates clear water with few suspended particles.
Conductivity reflects overall water mineralisation, in µS/cm. It has no strict sanitary threshold but indicates the dissolved mineral salt content.
Maintenance budget: ~£8/year
For 2 persons, water at 3°f deposits around 0.1 kg of limescale per year in your appliances. Estimated cost in descalers, salt and filters.
Calcium: ~5 mg per litre
Your water provides 5 mg of calcium/L, which is 1% of the recommended daily intake.
Filtration not required
Your soft water does not require filtration. A jug filter remains useful for taste.
Drinking water in Vic-le-Comte, in the Puy-de-Dôme department is managed by sme de la region d'issoire (suez), which handles production, treatment and distribution of tap water in the municipality. The last available official sanitary analysis for Vic-le-Comte dates from 19 June 2026.
Compare the water quality in Vic-le-Comte with any other city available on the site.
Type a city name to start the comparison.
How does Vic-le-Comte compare to the 43 cities in the Puy-de-Dôme department and the 4806 largest cities in France in our database, on key water quality indicators.
Comparison based on 43 cities in Puy-de-Dôme department and the 4806 largest cities in France in our database.
Top 10 cities in the Puy-de-Dôme department ranked by tap water quality in our database.
Vic-le-Comte ranks 11th out of 43 cities in the department in our database.
Tap water in Vic-le-Comte has a quality index of 6.8/10 (good quality) in our database, calculated on nitrates, PFAS, pH, free chlorine and turbidity. This is a comparative reading of Hub'Eau data, not an official rating.
Tap water hardness in Vic-le-Comte is 3°f (French degrees), making it very soft water. The average is 6.8°f in the Puy-de-Dôme department and 22.1°f across our entire database.
Very little. At 3°f, water in Vic-le-Comte is very soft: limescale deposits remain minimal on taps, shower walls and heating appliances.
No. With very soft water (3°f), a softener would bring nothing: limescale isn't the issue in Vic-le-Comte.
Yes. In the last available official sanitary analysis (19 June 2026), water distributed in Vic-le-Comte was declared compliant, meaning it can be drunk directly from the tap. Official conclusion: "Eau d'alimentation conforme aux limites de qualité et non conforme aux références de qualité." This is a point-in-time sample, not real-time monitoring.
The pH measured in Vic-le-Comte is 7. Regulations require a value between 6.5 and 9: the water is within this range.
Compare tap water quality in other cities of the Puy-de-Dôme department, ranked by quality index.
Methodology: the quality index compares each city against the 4806 other cities in our database on 5 parameters (nitrates, PFAS, pH, free chlorine, turbidity) and averages its relative position on each. This is not an official rating, only a simplified comparative reading of Hub’Eau data.