Hardness, nitrates, pH, sanitary compliance: the real tap water quality in Pleyber-Christ (soft water), with official Hub'Eau data updated monthly.
✓ Compliant with sanitary standardsPleyber-Christ (Finistère) benefits from soft water at 9.2°f, with no notable limescale issues. Dishwashers and water heaters can reduce or skip regenerating salt. Soft water picks up traces from metal pipes more easily: if indoor plumbing is old, a point-of-use filter remains a useful precaution. Official sanitary tests declare it compliant with current standards across all monitored parameters.
Results from the latest official sanitary samples (Hub’Eau, French Ministry of Health). Click a card to understand what each parameter measures.
Sanitary compliance summarises adherence to French regulatory limits across all analysed parameters (bacteriology, chemistry, radioactivity). Compliant water can be consumed directly from the tap without additional treatment.
The TH (titre hydrotimétrique) measures calcium and magnesium concentration, expressed in French degrees (°f). The higher it is, the harder the water and the faster limescale deposits on surfaces and in appliances.
Nitrates come mainly from agriculture and waste water. The French regulatory limit is 50 mg/L; below 25 mg/L, the level is considered low.
pH measures water acidity. Regulations require a value between 6.5 and 9: outside this range, water may encourage pipe corrosion or affect taste.
Free chlorine is added to disinfect water and prevent bacterial growth in the distribution network. High levels can produce a perceptible taste or odour, without health risk at authorised levels.
Turbidity measures water clarity, in NTU (nephelometric turbidity units). A low value indicates clear water with few suspended particles.
Conductivity reflects overall water mineralisation, in µS/cm. It has no strict sanitary threshold but indicates the dissolved mineral salt content.
Maintenance budget: ~£26/year
For 2 persons, water at 9.2°f deposits around 0.4 kg of limescale per year in your appliances. Estimated cost in descalers, salt and filters.
Calcium: ~15 mg per litre
Your water provides 15 mg of calcium/L, which is 2% of the recommended daily intake.
Filtration not required
Your soft water does not require filtration. A jug filter remains useful for taste.
Drinking water in Pleyber-Christ, in the Finistère department is managed by spe an dour-morlaix-communaute, which handles production, treatment and distribution of tap water in the municipality. The last available official sanitary analysis for Pleyber-Christ dates from 20 April 2026.
Compare the water quality in Pleyber-Christ with any other city available on the site.
Type a city name to start the comparison.
How does Pleyber-Christ compare to the 103 cities in the Finistère department and the 4806 largest cities in France in our database, on key water quality indicators.
Comparison based on 103 cities in Finistère department and the 4806 largest cities in France in our database.
Top 10 cities in the Finistère department ranked by tap water quality in our database.
Pleyber-Christ ranks 74th out of 103 cities in the department in our database.
Tap water in Pleyber-Christ has a quality index of 3.2/10 (caution recommended) in our database, calculated on nitrates, PFAS, pH, free chlorine and turbidity. This is a comparative reading of Hub'Eau data, not an official rating.
Tap water hardness in Pleyber-Christ is 9.2°f (French degrees), making it soft water. The average is 12.3°f in the Finistère department and 22.1°f across our entire database.
Little. At 9.2°f, water in Pleyber-Christ is soft: limescale deposits remain limited on taps, shower walls and heating appliances.
No. With soft water (9.2°f), a softener would bring nothing: limescale isn't the issue in Pleyber-Christ.
Yes. In the last available official sanitary analysis (20 April 2026), water distributed in Pleyber-Christ was declared compliant, meaning it can be drunk directly from the tap. Official conclusion: "Eau d'alimentation conforme aux exigences de qualité en vigueur pour l'ensemble des paramètres mesurés." This is a point-in-time sample, not real-time monitoring.
The pH measured in Pleyber-Christ is 7.7. Regulations require a value between 6.5 and 9: the water is within this range.
Compare tap water quality in other cities of the Finistère department, ranked by quality index.
Methodology: the quality index compares each city against the 4806 other cities in our database on 5 parameters (nitrates, PFAS, pH, free chlorine, turbidity) and averages its relative position on each. This is not an official rating, only a simplified comparative reading of Hub’Eau data.