Hardness, nitrates, pH, sanitary compliance: the real tap water quality in Montval-sur-Loir (moderately hard water), with official Hub'Eau data updated monthly.
✓ Compliant with sanitary standardsMontval-sur-Loir water reaches 24.3°f — a moderate level reflecting local geology. Limescale is visible on shower glass and taps but has no impact on sanitary water quality. Standard dishwasher tablets, regular regenerating salt and periodic coffee maker descaling are the only routine precautions needed. Official sanitary tests declare it compliant with current standards across all monitored parameters.
Results from the latest official sanitary samples (Hub’Eau, French Ministry of Health). Click a card to understand what each parameter measures.
Sanitary compliance summarises adherence to French regulatory limits across all analysed parameters (bacteriology, chemistry, radioactivity). Compliant water can be consumed directly from the tap without additional treatment.
The TH (titre hydrotimétrique) measures calcium and magnesium concentration, expressed in French degrees (°f). The higher it is, the harder the water and the faster limescale deposits on surfaces and in appliances.
Nitrates come mainly from agriculture and waste water. The French regulatory limit is 50 mg/L; below 25 mg/L, the level is considered low.
PFAS are persistent chemical compounds, sometimes called "forever chemicals", used in industry. The vigilance threshold used here is 0.1 µg/L, consistent with current health recommendations.
pH measures water acidity. Regulations require a value between 6.5 and 9: outside this range, water may encourage pipe corrosion or affect taste.
Free chlorine is added to disinfect water and prevent bacterial growth in the distribution network. High levels can produce a perceptible taste or odour, without health risk at authorised levels.
Turbidity measures water clarity, in NTU (nephelometric turbidity units). A low value indicates clear water with few suspended particles.
Conductivity reflects overall water mineralisation, in µS/cm. It has no strict sanitary threshold but indicates the dissolved mineral salt content.
Maintenance budget: ~£68/year
For 2 persons, water at 24.3°f deposits around 1.2 kg of limescale per year in your appliances. Estimated cost in descalers, salt and filters.
Calcium: ~39 mg per litre
Your water provides 39 mg of calcium/L, which is 4% of the recommended daily intake.
Filter jug: cartridge every 5 months
At 24.3°f, replace the cartridge every 5 months. An under-sink filter lasts 6 to 12 months.
Drinking water in Montval-sur-Loir, in the Sarthe department is managed by cc de loir luce berce, which handles production, treatment and distribution of tap water in the municipality. The last available official sanitary analysis for Montval-sur-Loir dates from 4 June 2026.
Compare the water quality in Montval-sur-Loir with any other city available on the site.
Type a city name to start the comparison.
How does Montval-sur-Loir compare to the 44 cities in the Sarthe department and the 4806 largest cities in France in our database, on key water quality indicators.
Comparison based on 44 cities in Sarthe department and the 4806 largest cities in France in our database.
Top 10 cities in the Sarthe department ranked by tap water quality in our database.
Montval-sur-Loir ranks 1st out of 44 cities in the department in our database.
Tap water in Montval-sur-Loir has a quality index of 9.4/10 (excellent quality) in our database, calculated on nitrates, PFAS, pH, free chlorine and turbidity. This is a comparative reading of Hub'Eau data, not an official rating.
Tap water hardness in Montval-sur-Loir is 24.3°f (French degrees), making it moderately hard water. The average is 25.6°f in the Sarthe department and 22.1°f across our entire database.
Moderately. At 24.3°f, water in Montval-sur-Loir is moderately hard: limescale traces appear over time on surfaces that aren't wiped down, but not a daily problem with regular maintenance.
Not necessarily. At 24.3°f, regular antiscale maintenance is often sufficient; a softener is worth considering mainly if deposits become bothersome daily.
Yes. In the last available official sanitary analysis (4 June 2026), water distributed in Montval-sur-Loir was declared compliant, meaning it can be drunk directly from the tap. Official conclusion: "Eau d'alimentation conforme aux exigences de qualité en vigueur pour l'ensemble des paramètres mesurés." This is a point-in-time sample, not real-time monitoring.
The pH measured in Montval-sur-Loir is 7.6. Regulations require a value between 6.5 and 9: the water is within this range.
Compare tap water quality in other cities of the Sarthe department, ranked by quality index.
Methodology: the quality index compares each city against the 4806 other cities in our database on 5 parameters (nitrates, PFAS, pH, free chlorine, turbidity) and averages its relative position on each. This is not an official rating, only a simplified comparative reading of Hub’Eau data.