Hardness, nitrates, pH, sanitary compliance: the real tap water quality in Torcy (soft water), with official Hub'Eau data updated monthly.
✓ Compliant with sanitary standardsIn Torcy, in the Saône-et-Loire department, tap water hardness is 11.6°f — soft water that naturally limits limescale deposits. Appliances (washing machines, kettles, water heaters) benefit directly: scale build-up is slow and regular antiscale cleaning is sufficient without needing softening salt. Soft water also tends to taste pleasant, with adequate mineralisation. Official sanitary tests declare it compliant with current standards across all monitored parameters.
Results from the latest official sanitary samples (Hub’Eau, French Ministry of Health). Click a card to understand what each parameter measures.
Sanitary compliance summarises adherence to French regulatory limits across all analysed parameters (bacteriology, chemistry, radioactivity). Compliant water can be consumed directly from the tap without additional treatment.
The TH (titre hydrotimétrique) measures calcium and magnesium concentration, expressed in French degrees (°f). The higher it is, the harder the water and the faster limescale deposits on surfaces and in appliances.
Nitrates come mainly from agriculture and waste water. The French regulatory limit is 50 mg/L; below 25 mg/L, the level is considered low.
PFAS are persistent chemical compounds, sometimes called "forever chemicals", used in industry. The vigilance threshold used here is 0.1 µg/L, consistent with current health recommendations.
pH measures water acidity. Regulations require a value between 6.5 and 9: outside this range, water may encourage pipe corrosion or affect taste.
Free chlorine is added to disinfect water and prevent bacterial growth in the distribution network. High levels can produce a perceptible taste or odour, without health risk at authorised levels.
Turbidity measures water clarity, in NTU (nephelometric turbidity units). A low value indicates clear water with few suspended particles.
Conductivity reflects overall water mineralisation, in µS/cm. It has no strict sanitary threshold but indicates the dissolved mineral salt content.
Maintenance budget: ~£32/year
For 2 persons, water at 11.6°f deposits around 0.6 kg of limescale per year in your appliances. Estimated cost in descalers, salt and filters.
Calcium: ~19 mg per litre
Your water provides 19 mg of calcium/L, which is 2% of the recommended daily intake.
Filtration not required
Your soft water does not require filtration. A jug filter remains useful for taste.
Drinking water in Torcy, in the Saône-et-Loire department is managed by veolia eau territoire, which handles production, treatment and distribution of tap water in the municipality. The last available official sanitary analysis for Torcy dates from 25 February 2026.
Compare the water quality in Torcy with any other city available on the site.
Type a city name to start the comparison.
How does Torcy compare to the 36 cities in the Saône-et-Loire department and the 4806 largest cities in France in our database, on key water quality indicators.
Comparison based on 36 cities in Saône-et-Loire department and the 4806 largest cities in France in our database.
Top 10 cities in the Saône-et-Loire department ranked by tap water quality in our database.
Torcy ranks 7th out of 36 cities in the department in our database.
Tap water in Torcy has a quality index of 6.3/10 (good quality) in our database, calculated on nitrates, PFAS, pH, free chlorine and turbidity. This is a comparative reading of Hub'Eau data, not an official rating.
Tap water hardness in Torcy is 11.6°f (French degrees), making it soft water. The average is 22.2°f in the Saône-et-Loire department and 22.1°f across our entire database.
Little. At 11.6°f, water in Torcy is soft: limescale deposits remain limited on taps, shower walls and heating appliances.
No. With soft water (11.6°f), a softener would bring nothing: limescale isn't the issue in Torcy.
Yes. In the last available official sanitary analysis (25 February 2026), water distributed in Torcy was declared compliant, meaning it can be drunk directly from the tap. This is a point-in-time sample, not real-time monitoring.
The pH measured in Torcy is 7.84. Regulations require a value between 6.5 and 9: the water is within this range.
Compare tap water quality in other cities of the Saône-et-Loire department, ranked by quality index.
Methodology: the quality index compares each city against the 4806 other cities in our database on 5 parameters (nitrates, PFAS, pH, free chlorine, turbidity) and averages its relative position on each. This is not an official rating, only a simplified comparative reading of Hub’Eau data.