Hardness, nitrates, pH, sanitary compliance: the real tap water quality in Châtenay-Malabry (moderately hard water), with official Hub'Eau data updated monthly.
✓ Compliant with sanitary standardsChâtenay-Malabry water reaches 24.3°f — a moderate level reflecting local geology. Limescale is visible on shower glass and taps but has no impact on sanitary water quality. Standard dishwasher tablets, regular regenerating salt and periodic coffee maker descaling are the only routine precautions needed. Official sanitary tests declare it compliant with current standards across all monitored parameters.
Results from the latest official sanitary samples (Hub’Eau, French Ministry of Health). Click a card to understand what each parameter measures.
Sanitary compliance summarises adherence to French regulatory limits across all analysed parameters (bacteriology, chemistry, radioactivity). Compliant water can be consumed directly from the tap without additional treatment.
The TH (titre hydrotimétrique) measures calcium and magnesium concentration, expressed in French degrees (°f). The higher it is, the harder the water and the faster limescale deposits on surfaces and in appliances.
Nitrates come mainly from agriculture and waste water. The French regulatory limit is 50 mg/L; below 25 mg/L, the level is considered low.
pH measures water acidity. Regulations require a value between 6.5 and 9: outside this range, water may encourage pipe corrosion or affect taste.
Free chlorine is added to disinfect water and prevent bacterial growth in the distribution network. High levels can produce a perceptible taste or odour, without health risk at authorised levels.
Turbidity measures water clarity, in NTU (nephelometric turbidity units). A low value indicates clear water with few suspended particles.
Conductivity reflects overall water mineralisation, in µS/cm. It has no strict sanitary threshold but indicates the dissolved mineral salt content.
Maintenance budget: ~£68/year
For 2 persons, water at 24.3°f deposits around 1.2 kg of limescale per year in your appliances. Estimated cost in descalers, salt and filters.
Calcium: ~39 mg per litre
Your water provides 39 mg of calcium/L, which is 4% of the recommended daily intake.
Filter jug: cartridge every 5 months
At 24.3°f, replace the cartridge every 5 months. An under-sink filter lasts 6 to 12 months.
Drinking water in Châtenay-Malabry, in the Hauts-de-Seine department is managed by veolia franciliane, which handles production, treatment and distribution of tap water in the municipality. The last available official sanitary analysis for Châtenay-Malabry dates from 2 June 2026.
Compare the water quality in Châtenay-Malabry with any other city available on the site.
Type a city name to start the comparison.
How does Châtenay-Malabry compare to the 35 cities in the Hauts-de-Seine department and the 4806 largest cities in France in our database, on key water quality indicators.
Comparison based on 35 cities in Hauts-de-Seine department and the 4806 largest cities in France in our database.
Top 10 cities in the Hauts-de-Seine department ranked by tap water quality in our database.
Châtenay-Malabry ranks 4th out of 35 cities in the department in our database.
Tap water in Châtenay-Malabry has a quality index of 7.4/10 (good quality) in our database, calculated on nitrates, PFAS, pH, free chlorine and turbidity. This is a comparative reading of Hub'Eau data, not an official rating.
Tap water hardness in Châtenay-Malabry is 24.3°f (French degrees), making it moderately hard water. The average is 21°f in the Hauts-de-Seine department and 22.1°f across our entire database.
Moderately. At 24.3°f, water in Châtenay-Malabry is moderately hard: limescale traces appear over time on surfaces that aren't wiped down, but not a daily problem with regular maintenance.
Not necessarily. At 24.3°f, regular antiscale maintenance is often sufficient; a softener is worth considering mainly if deposits become bothersome daily.
Yes. In the last available official sanitary analysis (2 June 2026), water distributed in Châtenay-Malabry was declared compliant, meaning it can be drunk directly from the tap. This is a point-in-time sample, not real-time monitoring.
The pH measured in Châtenay-Malabry is 7.41. Regulations require a value between 6.5 and 9: the water is within this range.
Compare tap water quality in other cities of the Hauts-de-Seine department, ranked by quality index.
Methodology: the quality index compares each city against the 4806 other cities in our database on 5 parameters (nitrates, PFAS, pH, free chlorine, turbidity) and averages its relative position on each. This is not an official rating, only a simplified comparative reading of Hub’Eau data.