Hardness, nitrates, pH, sanitary compliance: the real tap water quality in Furiani (soft water), with official Hub'Eau data updated monthly.
✓ Compliant with sanitary standardsIn Furiani, in the Haute-Corse department, tap water hardness is 12.5°f — soft water that naturally limits limescale deposits. Appliances (washing machines, kettles, water heaters) benefit directly: scale build-up is slow and regular antiscale cleaning is sufficient without needing softening salt. Soft water also tends to taste pleasant, with adequate mineralisation. Official sanitary tests declare it compliant with current standards across all monitored parameters.
Results from the latest official sanitary samples (Hub’Eau, French Ministry of Health). Click a card to understand what each parameter measures.
Sanitary compliance summarises adherence to French regulatory limits across all analysed parameters (bacteriology, chemistry, radioactivity). Compliant water can be consumed directly from the tap without additional treatment.
The TH (titre hydrotimétrique) measures calcium and magnesium concentration, expressed in French degrees (°f). The higher it is, the harder the water and the faster limescale deposits on surfaces and in appliances.
Nitrates come mainly from agriculture and waste water. The French regulatory limit is 50 mg/L; below 25 mg/L, the level is considered low.
PFAS are persistent chemical compounds, sometimes called "forever chemicals", used in industry. The vigilance threshold used here is 0.1 µg/L, consistent with current health recommendations.
pH measures water acidity. Regulations require a value between 6.5 and 9: outside this range, water may encourage pipe corrosion or affect taste.
Free chlorine is added to disinfect water and prevent bacterial growth in the distribution network. High levels can produce a perceptible taste or odour, without health risk at authorised levels.
Turbidity measures water clarity, in NTU (nephelometric turbidity units). A low value indicates clear water with few suspended particles.
Conductivity reflects overall water mineralisation, in µS/cm. It has no strict sanitary threshold but indicates the dissolved mineral salt content.
Maintenance budget: ~£35/year
For 2 persons, water at 12.5°f deposits around 0.6 kg of limescale per year in your appliances. Estimated cost in descalers, salt and filters.
Calcium: ~20 mg per litre
Your water provides 20 mg of calcium/L, which is 2% of the recommended daily intake.
Filtration not required
Your soft water does not require filtration. A jug filter remains useful for taste.
Drinking water in Furiani, in the Haute-Corse department is managed by acqua publica, which handles production, treatment and distribution of tap water in the municipality. The last available official sanitary analysis for Furiani dates from 27 April 2026.
Compare the water quality in Furiani with any other city available on the site.
Type a city name to start the comparison.
How does Furiani compare to the 17 cities in the Haute-Corse department and the 4806 largest cities in France in our database, on key water quality indicators.
Comparison based on 17 cities in Haute-Corse department and the 4806 largest cities in France in our database.
Top 10 cities in the Haute-Corse department ranked by tap water quality in our database.
Furiani ranks 1st out of 17 cities in the department in our database.
Tap water in Furiani has a quality index of 7.6/10 (good quality) in our database, calculated on nitrates, PFAS, pH, free chlorine and turbidity. This is a comparative reading of Hub'Eau data, not an official rating.
Tap water hardness in Furiani is 12.5°f (French degrees), making it soft water. The average is 11.4°f in the Haute-Corse department and 22.1°f across our entire database.
Little. At 12.5°f, water in Furiani is soft: limescale deposits remain limited on taps, shower walls and heating appliances.
No. With soft water (12.5°f), a softener would bring nothing: limescale isn't the issue in Furiani.
Yes. In the last available official sanitary analysis (27 April 2026), water distributed in Furiani was declared compliant, meaning it can be drunk directly from the tap. Official conclusion: "Eau d'alimentation conforme aux limites de qualité. Eau agressive." This is a point-in-time sample, not real-time monitoring.
The pH measured in Furiani is 7.6. Regulations require a value between 6.5 and 9: the water is within this range.
Compare tap water quality in other cities of the Haute-Corse department, ranked by quality index.
Methodology: the quality index compares each city against the 4806 other cities in our database on 5 parameters (nitrates, PFAS, pH, free chlorine, turbidity) and averages its relative position on each. This is not an official rating, only a simplified comparative reading of Hub’Eau data.