Hardness, nitrates, pH, sanitary compliance: the real tap water quality in Sinnamary (very soft water), with official Hub'Eau data updated monthly.
⚠ Non-compliance detectedIn Sinnamary, tap water is very soft at 5.3°f — well below the French average of around 22°f. This low limescale level naturally protects appliances (washing machines, kettles, dishwashers) and prevents white deposits on taps and shower walls. Very soft water can feel soapy when rinsing and may be slightly corrosive on metal pipes; if plumbing is old, checking lead or copper levels is advisable. Official sanitary tests report a non-compliance on at least one monitored parameter: see the details below.
Results from the latest official sanitary samples (Hub’Eau, French Ministry of Health). Click a card to understand what each parameter measures.
Sanitary compliance summarises adherence to French regulatory limits across all analysed parameters (bacteriology, chemistry, radioactivity). Compliant water can be consumed directly from the tap without additional treatment.
The TH (titre hydrotimétrique) measures calcium and magnesium concentration, expressed in French degrees (°f). The higher it is, the harder the water and the faster limescale deposits on surfaces and in appliances.
Nitrates come mainly from agriculture and waste water. The French regulatory limit is 50 mg/L; below 25 mg/L, the level is considered low.
PFAS are persistent chemical compounds, sometimes called "forever chemicals", used in industry. The vigilance threshold used here is 0.1 µg/L, consistent with current health recommendations.
pH measures water acidity. Regulations require a value between 6.5 and 9: outside this range, water may encourage pipe corrosion or affect taste.
Free chlorine is added to disinfect water and prevent bacterial growth in the distribution network. High levels can produce a perceptible taste or odour, without health risk at authorised levels.
Turbidity measures water clarity, in NTU (nephelometric turbidity units). A low value indicates clear water with few suspended particles.
Conductivity reflects overall water mineralisation, in µS/cm. It has no strict sanitary threshold but indicates the dissolved mineral salt content.
Maintenance budget: ~£15/year
For 2 persons, water at 5.3°f deposits around 0.3 kg of limescale per year in your appliances. Estimated cost in descalers, salt and filters.
Calcium: ~8 mg per litre
Your water provides 8 mg of calcium/L, which is 1% of the recommended daily intake.
Filtration not required
Your soft water does not require filtration. A jug filter remains useful for taste.
Drinking water in Sinnamary, in the Guyane department is managed by societe guyanaise des eaux, which handles production, treatment and distribution of tap water in the municipality. The last available official sanitary analysis for Sinnamary dates from 26 May 2026.
Compare the water quality in Sinnamary with any other city available on the site.
Type a city name to start the comparison.
How does Sinnamary compare to the 15 cities in the Guyane department and the 4806 largest cities in France in our database, on key water quality indicators.
Comparison based on 15 cities in Guyane department and the 4806 largest cities in France in our database.
Top 10 cities in the Guyane department ranked by tap water quality in our database.
Sinnamary ranks 5th out of 15 cities in the department in our database.
Tap water in Sinnamary has a quality index of 6.1/10 (good quality) in our database, calculated on nitrates, PFAS, pH, free chlorine and turbidity. This is a comparative reading of Hub'Eau data, not an official rating.
Tap water hardness in Sinnamary is 5.3°f (French degrees), making it very soft water. The average is 3.8°f in the Guyane department and 22.1°f across our entire database.
Very little. At 5.3°f, water in Sinnamary is very soft: limescale deposits remain minimal on taps, shower walls and heating appliances.
No. With very soft water (5.3°f), a softener would bring nothing: limescale isn't the issue in Sinnamary.
The last available official sanitary analysis (26 May 2026) reports a non-compliance on at least one parameter. Official conclusion: "Eau d'alimentation non-conforme aux exigences de qualité." The affected parameter and any usage restrictions are in the official report: contact your water distributor or regional health agency (ARS) for details.
The pH measured in Sinnamary is 7. Regulations require a value between 6.5 and 9: the water is within this range.
Compare tap water quality in other cities of the Guyane department, ranked by quality index.
Methodology: the quality index compares each city against the 4806 other cities in our database on 5 parameters (nitrates, PFAS, pH, free chlorine, turbidity) and averages its relative position on each. This is not an official rating, only a simplified comparative reading of Hub’Eau data.