Hardness, nitrates, pH, sanitary compliance: the real tap water quality in Beautor (very hard water), with official Hub'Eau data updated monthly.
✓ Compliant with sanitary standardsBeautor is in a very hard water zone: 41.3°f — excess limescale that results in visible deposits within weeks on all surfaces. Water heater and washing machine heating elements are first to suffer: 1mm of scale increases electricity consumption by around 10%. A central softener is the most effective solution; alternatively, systematic use of soda crystals, white vinegar and regular descalers is essential. Official sanitary tests declare it compliant with current standards across all monitored parameters.
Results from the latest official sanitary samples (Hub’Eau, French Ministry of Health). Click a card to understand what each parameter measures.
Sanitary compliance summarises adherence to French regulatory limits across all analysed parameters (bacteriology, chemistry, radioactivity). Compliant water can be consumed directly from the tap without additional treatment.
The TH (titre hydrotimétrique) measures calcium and magnesium concentration, expressed in French degrees (°f). The higher it is, the harder the water and the faster limescale deposits on surfaces and in appliances.
Nitrates come mainly from agriculture and waste water. The French regulatory limit is 50 mg/L; below 25 mg/L, the level is considered low.
pH measures water acidity. Regulations require a value between 6.5 and 9: outside this range, water may encourage pipe corrosion or affect taste.
Free chlorine is added to disinfect water and prevent bacterial growth in the distribution network. High levels can produce a perceptible taste or odour, without health risk at authorised levels.
Turbidity measures water clarity, in NTU (nephelometric turbidity units). A low value indicates clear water with few suspended particles.
Conductivity reflects overall water mineralisation, in µS/cm. It has no strict sanitary threshold but indicates the dissolved mineral salt content.
Maintenance budget: ~£116/year
For 2 persons, water at 41.3°f deposits around 2.0 kg of limescale per year in your appliances. Estimated cost in descalers, salt and filters.
Calcium: ~66 mg per litre
Your water provides 66 mg of calcium/L, which is 7% of the recommended daily intake.
Filter jug: cartridge every 3 months
At 41.3°f, replace the cartridge every 3 months. An under-sink filter lasts 6 to 12 months.
Drinking water in Beautor, in the Aisne department is managed by veoliaeau (nord), which handles production, treatment and distribution of tap water in the municipality. The last available official sanitary analysis for Beautor dates from 26 May 2026.
Compare the water quality in Beautor with any other city available on the site.
Type a city name to start the comparison.
How does Beautor compare to the 28 cities in the Aisne department and the 4806 largest cities in France in our database, on key water quality indicators.
Comparison based on 28 cities in Aisne department and the 4806 largest cities in France in our database.
Top 10 cities in the Aisne department ranked by tap water quality in our database.
Beautor ranks 6th out of 28 cities in the department in our database.
Tap water in Beautor has a quality index of 6.4/10 (good quality) in our database, calculated on nitrates, PFAS, pH, free chlorine and turbidity. This is a comparative reading of Hub'Eau data, not an official rating.
Tap water hardness in Beautor is 41.3°f (French degrees), making it very hard water. The average is 35.1°f in the Aisne department and 22.1°f across our entire database.
Yes, significantly. At 41.3°f, water in Beautor is very hard: limescale deposits rapidly on all water-contact surfaces and heating appliances.
It may be justified. At 41.3°f, water in Beautor is very hard: a softener limits scale build-up in pipes and heating appliances, worth comparing with simple antiscale maintenance depending on daily inconvenience.
Yes. In the last available official sanitary analysis (26 May 2026), water distributed in Beautor was declared compliant, meaning it can be drunk directly from the tap. Official conclusion: "Eau d'alimentation conforme aux exigences de qualité en vigueur pour l'ensemble des paramètres mesurés." This is a point-in-time sample, not real-time monitoring.
The pH measured in Beautor is 7.2. Regulations require a value between 6.5 and 9: the water is within this range.
Compare tap water quality in other cities of the Aisne department, ranked by quality index.
Methodology: the quality index compares each city against the 4806 other cities in our database on 5 parameters (nitrates, PFAS, pH, free chlorine, turbidity) and averages its relative position on each. This is not an official rating, only a simplified comparative reading of Hub’Eau data.